EXPRESS WARRANTY
Great Lakes Power Service Company (GLPSCO) warrants its rebuilt components/units to be free from defects in material and workmanship for a period of 6 months from the date of shipment or 1,000 hours of operation, whichever comes first.
REMEDY
In the event any material or workmanship proves to be defective, within the warranty period, GLPSCO will at its sole option, replace or repair said component/unit at the repair facility authorized by GLPSCO.
INSTALLATION BY GLPSCO
GLPSCO further warrants that the component/unit removal and reinstallation will be free from defects in materials and workmanship for a period of 6 months from the date on installation, providing GLPSCO was contracted for the ORIGINAL removal, repair and reinstallation of said component/unit.
INSTALLATION BY OTHERS
GLPSCO will not be responsible for the costs of removal, freight costs to and from the repair facility and costs incurred in the re-installation of any component/unit which was removed and/or installed by others.
LIMITATIONS AND EXCLUSIONS
The express warranty in the preceding paragraphs is only warranty made by GLPSCO. No other warranties, express or implied, including warranties as to merchantability or fitness for a particular purpose are made by GLPSCO. Under no circumstances shall GLPSCO be liable for any incidental, contingent or consequential damages or costs resulting from a warrantable failure. GLPSCO further makes no warranty as to any item that has been mishandled, including storage, improperly installed, misapplied, contaminated, abused or otherwise improperly operated according to the manufacturer’s procedures, including but not limited to, failure to use approved fluids, properly lubricate and cool or to follow the manufacturer’s recommended maintenance schedule of these systems.
NOTICE
GLPSCO shall not be obligated to perform under any of the aforementioned warranties unless the customer properly notifies GLPSCO by phone, wire or mail of said defect and arrangements are made through GLPSCO BEFORE proceeding with any repairs.
PAYMENT
Notwithstanding the above, GLPSCO shall have no liability under the foregoing limited warranties unless and until GLPSCO has been paid in full for all rebuilt components/units, for all removal and re-installation charges, and for all other goods and services originally supplied by GLPSCO to its customer.
IMPORTANT INSTALLATION INFORMATION
All remanufactured components are tested for performance and reliability. The proper installation of this component is critical and if improperly installed will VOID all warranties. Contaminated oil left in the system from past failures has the potential of causing immediate malfunction and damage. Every precaution should be taken to assure long, trouble free service life. All aspects of Great Lakes Power
Products warranty consideration is based on the use of these installation procedures.
1) Clean and flush complete cooling system until free of all contaminates.
2) Inspect all hoses and connections to assure clean and free oil flow.
3) Inspect all electrical connections for corrosion and cleanliness.
4) Clean all screens and replace all filters.
5) Inspect input coupling and drivelines for proper alignment and lubrication.
6) Fill the unit with manufacturer approved oil and set operating oil level as specified in the machine owner’s manual.
7) Run engine at idle and operate all controls to purge system of air.
8) Operate machine for approximately eight (8) hours and change oil and filters to promote longer service life.
9) Call Great Lakes Power Service if you have any questions or need assistance.
Great Lakes Power – Headquarters
7455 Tyler Blvd.
Mentor, Ohio 44060
Phone: 800.325.6880
Email: sales@glpower.com